Because of their superior mechanical properties and freedom from porosity, forgings are often associated with the high pressure applications of the valve and fitting industry. Corrosion and heat-resistant materials are used for flanges, valve bodies and stems, tees, elbow reducers, saddles and other fittings.
The hydraulic cylinder part is an accessory of the hydraulic cylinder, which can bear high load.
The hydraulic cylinder is an actuator that converts hydraulic energy into mechanical energy and performs linear reciprocating motion or swing motion.
The hydraulic motor is an actuator of the hydraulic system that converts the liquid pressure energy which provided by the hydraulic pump into the torque and speed of its output shaft.
The hydraulic steering gear is a hydraulic power steering type between the steering wheel and the steering mechanism.
Custom Metal Forgings Parts Manufacturer
As one of the leading custom metal forgings parts manufacturers, JC Forging provides custom forged parts of various shapes, such as forged hydraulic cylinder bottoms, forged hydraulic cylinder end caps, forged hydraulic cylinder heads, forged hydraulic cylinder clevis, forged trunnions, etc. Forging is a manufacturing process involving the shaping of metal through hammering, pressing, or rolling. And a wide range of metals can be forged. Typical metals used in forging include carbon steel, alloy steel, and stainless steel. Very soft metals such as aluminum, brass, and copper can also be forged.
We, a custom industrial forged parts factory in china, also specialize in the production of hydraulic equipment, including hydraulic cylinders, cycloidal hydraulic motors, hydraulic steering gears, etc. The forging process can produce parts with superb mechanical properties with minimum waste. The basic concept is that the original metal is deformed to the desired geometric shape—giving it higher fatigue resistance and strength. The metal forging process is economically sound with the ability to mass-produce parts and achieve specific mechanical properties in the finished product.
According to the product specifications we design the mold
We will cut the material base on the parts parameters.
The heated billet with 1000° C will be put at the middle of the dies, close the dies
The raw parts with the fin will put in a cutting mold to remove the fin.
Heating the material to 1000°C
To remove the oxide layer of the forging and get a uniformed surface
To get accurate dimensions, the machining process is needed.
Every parts in my factory must be inspected the quality before leading to my customers.
We are experienced in export package, we will follow customers request to pack the parts, the plywood box or carton, pallets all available.
Ⅰ. What should I do if the hydraulic cylinder moves irregularly?Hydraulic cylinder is a hydraulic machine implementing component that converts hydraulic function into mechanical kinetic energy and pe...READ MORE
Ⅰ. Decomposition and maintenance of hydraulic cylinderFirst of all, the hydraulic circuit must be depressurized, otherwise when we loosen the oil pipe joint connected to the hydraulic cylinder, the l...READ MORE
Ⅰ. How to maintain the hydraulic cylinder?Because the hydraulic cylinder has to bear a very large gas pressure, the heavier the load, the greater its gas pressure will be. Therefore, doing a good job...READ MORE